Testo 770-2 multimeter-hook-clamp-meter 0590 7702

€233.53

Add to cart

- Pliers with one fully retractable side for non-contact measurement, with which it is possible to grip each wire individually.
- A K-type temperature sensor can be connected.
- TRMS or True root mean square measurement.
- It is not possible to choose wrong settings.
- Suitable for almost all electrical parameter measurement tasks.

Measuring range for voltage: 1 mV...600 V (DC/AC)
Accuracy for voltage: ±(0.8% of measured value + 3 digits; DC) and ±(1% of measured value + 3 digits; AC)
Resolution for voltage: 1 mV

Measuring range for current (clamps): 0.1...400 A (DC/AC)
Measuring range for current (wires): 0.1...400 μA (DC/AC)
Accuracy for current (clamps): ±(2% of measured value + 5 digits; DC/AC)
Accuracy for current (wires): ±(1.5% of measured value + 5 digits; DC/AC)
Resolution for current (clamps): 0.1 A
Resolution for current (wires): 0.1 μA

Measuring range for resistance: 0.1 Ω...40 MΩ
Accuracy for resistance: ±(1.5% of measured value + 3 digits)
Resolution for resistance: 0.1 Ω

Measuring range for capacitance: 1 nF...100 μF
Accuracy for capacitance: ±(1.5% of measured value + 5 digits)
Resolution for capacitance: 0.01 nF

Measuring range for frequency: 0.001 Hz...10 kHz
Accuracy for frequency: ±(0.1% of measured value + 1 digit)
Frequency resolution: 0.001 Hz

Measuring range for temperature (for K-type sensor): -20...+500°C
Accuracy for temperature in the range 0...+100°C (for K-type sensor): ±1°C
Temperature resolution (for K-type sensor): 0.2°C

Operating temperature: -10...+50°C
Relative air humidity of use: 0...80%rM
Storage temperature: -15...+60°C
Batteries: 3xAAA finger batteries (included)
Dimensions: 249×96×43mm
Safety standard: CAT IV 600 V; CAT III 1000V
Weight: 378g

Measuring cables included.